moving parts.
The label on your tool may include the following symbols. The symbols and their definitions are as follows:
DeWALT DCBL722 - SAVE THESE INSTRUCTIONS
BATTERIES AND CHARGERS
The battery pack is not fully charged out of the carton.
Before using the battery pack and charger, read the safety instructions below and then follow the charging
procedures outlined. When ordering replacement battery packs, be sure to include the catalog number and voltage.
Your tool uses a DeWALT charger. Be sure to read all safety instructions before using your charger. Consult the
chart at the end of this manual for compatibility of chargers and battery packs.
READ ALL INSTRUCTIONS
Important Safety Instructions for All Battery Packs
WARNING: Read all safety warnings and all instructions for the battery pack, charger, and power tool.
Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
Do not charge or use the battery pack in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Inserting or removing the battery pack from the charger may ignite the dust or fumes.
NEVER force the battery pack into the charger. DO NOT modify the battery pack in any way to fit into a
non-compatible charger as the battery pack may rupture causing serious personal injury. Consult the
chart at the end of this manual for compatibility of batteries and chargers.
Charge the battery packs only in designated DeWALT chargers.
DO NOT splash or immerse in water or other liquids.
Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 104 °F
(40 °C) (such as outside sheds or metal buildings in summer). For best life store battery packs in a cool, dry
location.
NOTE: Do not store the battery packs in a tool with the trigger switch locked on. Never tape the trigger
To Next Page
Loading...
Need help?
General
