other combustible material.
Do not attempt to repair the blower. To assure product safety and reliability, repairs, maintenance, and
adjustments should be performed by authorized service centers.
Do not operate blower in a gaseous or explosive atmosphere. Motors in these units normally spark, and the
sparks might ignite fumes.
Do not overreach. Keep proper footing and balance at all times.
Never leave the blower running unattended. Turn the power off.
Remove the battery pack before connecting the tube.
Store idle units. When not in use, the unit should be stored in a dry, high, or locked-up place – out of reach
of children.
Instructions for compatible batteries and chargers are included for reference in this manual. Read all
instruction manuals included with your battery pack or charger. Read all cautionary markings on the charger
and battery pack.
Disconnect the battery pack from the blower before making any adjustments, changing accessories,
servicing, moving, or storing the unit. Such preventative safety measures reduce the risk of starting the
appliance accidentally.
SAVE THESE INSTRUCTIONS
Additional Safety Information
WARNING: Never modify the power tool or any part of it. Damage or personal injury could result.
WARNING: ALWAYS use safety glaEveryday eyeglasses are NOT safety glasses. Also, use a face or dust
mask if the operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
ANSI Z87.1 eye protection (CAN/CSA Z94.3),
ANSI S12.6 (S3.19) hearing protection,
NIOSH/OSHA/MSHA respiratory protection.
WARNING: Some dust contains chemicals known to the State of California to cause cancer, birth defects, or
other reproductive harm. Examples of these chemicals are:
compounds in fertilizers,
compounds in insecticides, herbicides, and pesticides,
arsenic and chromium from chemically treated lumber.
To reduce your exposure to these chemicals, wear approved safety equipment such as dust masks that are specially
designed to filter out microscopic particles.
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other
construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing
dust to get into your mouth, eyes, or lay on the skin may promote the absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disperse dust, which may cause serious and
permanent respiratory or another injury. Always use NIOSH/OSHA-approved respiratory protection appropriate
for dust exposure. Direct particles away from face and body.
WARNING: Always wear proper personal hearing protection that conforms to ANSI S12.6 (S3.19)
during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.
CAUTION: When not in use, place the tool on its side on a stable surface where it will not cause a
tripping or falling hazard. Some tools with a large battery pack will stand upright but may be easily knocked over.
Air vents often cover moving parts and should be avoided. Loose clothes, jewelry or long hair can be caught in
To Next Page
Loading...
Need help?
General
