DeWalt DCD930 Original Instructions

ENGLISH
11
Do not probe with conductive objects.
Do not charge damaged battery packs.
Use only with DEWALT battery packs,
others may burst, causing personal
injury and damage.
Do not expose to water.
Have defective cords replaced
immediately.
Charge only between 4 °C and 40 °C.
Discard the battery pack with due care
for the environment.
Do not incinerate the battery pack
NiMH, NiCd+ and Li-Ion.
Charges NiMH and NiCd
battery packs.
Charges Li-Ion battery packs.
See technical data for charging time.
Package Contents
The package contains:
1 cordless percussion drill
(DCD945, DCD935, DCD925 models)
1 cordless midhandle drill driver
(DCD940, DCD930, DCD920 models)
1 Li-Ion battery pack (L1 models)
2 Li-Ion battery packs (L2 models)
2 NiMH battery packs (B2 models)
3 NiMH battery packs (B3 models)
1 Kitbox
1 Charger
1 Side handle
1 Instruction manual
1 Exploded drawing
NOTE : Battery packs and chargers are not included
with N-models.
s#HECKFORDAMAGETOTHETOOLPARTSOR
ACCESSORIESWHICHMAYHAVEOCCURREDDURING
TRANSPORT
s4AKETHETIMETOTHOROUGHLYREADAND
UNDERSTANDTHISMANUALPRIORTOOPERATION
Description (fi g. 1, 2)
WARNING: .EVERMODIFYTHEPOWER
TOOLORANYPARTOFIT$AMAGEOR
PERSONALINJURYCOULDRESULT
a. Trigger switch
b. Forward/reverse button
c. LED light
d. Chuck
e. Torque adjustment collar
f. Mode control collar
g. Gear shifter
h. Side handle
i. Main handle
j. Battery pack
k. Battery release buttons
l. Charger
INTENDED USE
These drills/drivers/hammerdrills are designed
for professional drilling, precussion drilling and
screwdriving applications.
Hot/cold pack delay.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These drills/drivers/hammerdrills are professional
power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.

DeWalt DCD930 Specifications

General

Brand	DeWalt
Model	DCD930
Category	Drill
Language	English