DeWalt DCF815 Original Instructions

ENGLISH
3
General Power Tool Safety Warnings

WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
powertool.
1) Work area safety
a ) Keep work area clean and well lit. Cluttered or dark
areas inviteaccidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust orfumes.
c ) Keep children and bystanders away while operating
a power tool. Distractions can cause you to losecontrol.
2) Electrical safety
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electricshock.
b ) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if
your body is earthed orgrounded.
c ) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electricshock.
d ) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electricshock.
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
DCF815
Voltage V
DC
10.8/12V MAX
Battery Type Li-Ion
No load speed min
-1
0–2450
Max torque Nm 107
Tool holder 6.35 mm
Weight (without battery pack) kg 0.8
Maximum initial battery voltage (measured without a workload)
is 12 volts. Nominal voltage is 10.8V.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.

Denotes risk of electricshock.

Denotes risk offire.
English (original instructions)
12V MAX CORDLESS IMPACT DRIVER
DCF815
Batteries Chargers/Charge Times(Minutes)
Cat # V
DC
Ah
Weight
kg
DCB104 DCB107 DCB112 DCB113 DCB115 DCB118 DCB132 DCB119
DCB122 10.8/12V max 2.0 0.22 30 90 60 50 30 X 30 60
DCB124 10.8/12V max 3.0 0.25 45 140 90 70 45 45 45 90
DCB125 10.8/12V max 1.3 0.20 22 60 40 30 22 X 22 40
DCB127 10.8/12V max 2.0 0.20 30 90 60 50 30 X 30 60

DeWalt DCF815 Specifications

General

Voltage	12V
Drive Size	1/4 inch
Tool Weight	2.2 lbs
LED Light	Yes
Chuck Type	Quick Release
No Load Speed	0-2450 RPM
Impacts per Minute	0-3400 IPM
Tool Length	6.25 in
Battery Type	Lithium-Ion