ENGLISH
28
Carrying and Suspending the Light
(fi g. 1, 4)
CAUTION: When light hangs by the
belt hook or loop, do not shake the light
or the object from which it hangs. Do
not hang the light from any electrical
wires or anything that is not secure.
Personal injury or property damage
may occur.
CAUTION: Only use the belt hook or
the loop for hanging the LED worklight.
The belt hook and loop are not intended
to support additional weight. Do not
attach or hang anything additional to the
light or risk of breakage may occur.
CAUTION: Do not use the belt hook
or loop to reach with or to support your
weight in any situation.
LOOP
The light may be carried or hung by the loop (b).
When not in use, the loop may be folded down.
BELT HOOK (OPTIONAL ACCESSORY)
WARNING: To reduce the risk of
serious personal injury, ensure the screw
holding the belt hook is secure.
IMPORTANT: When attaching or replacing the belt
hook (f), use only the screw (g) that is provided. Be
sure to securely tighten screw.
The belt hook (f) can be be attached to either side
of the light using only the screw (g) provided, to
accommodate left- or right-handed users. If the
hook is not desired at all, it can be removed from
the light.
To move belt hook, remove the screw (g) that holds
the belt hook in place, then reassemble on the
opposite side. Be sure to securely tighten screw.
MAINTENANCE
Your DEWALT worklight has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
WARNING: To reduce the risk of
serious personal injury, turn tool
off and disconnect battery pack
before making any adjustments or
removing/installing attachments or
accessories.
The charger and battery pack are not serviceable.
There are no serviceable parts inside.
Cleaning
WARNING: Blow dirt and dust out of
the main housing with dry air as often as
dirt is seen collecting in and around the
air vents. Wear approved eye protection
and approved dust mask when
performing this procedure.
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect
the charger from the AC outlet before
cleaning. Dirt and grease may be
removed from the exterior of the charger
using a cloth or soft non-metallic brush.
Do not use water or any cleaning
solutions.
Optional Accessories
WARNING: Since accessories, other
than those offered by DEWALT, have
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only DEWALT recommended
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your DEWALT product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
To Next Page
Loading...
