Need help?Do you have a question about the DeWalt DE2000 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Voltage | 120V |
| Power Source | Corded Electric |
| Amps | 15A |
| No Load Speed | 5800 rpm |
| Blade Diameter | 7-1/4 in |
| Arbor Size | 5/8 in |
Steps to securely attach a circular saw to the table.
Steps to prevent horizontal and vertical saw movement.
Advice on aligning the saw blade to the rip fence for accuracy.
Guide to selecting the correct insert for specific bevel angles.
Steps to attach a DEWALT router to the mounting plate.
Steps to prevent horizontal and vertical router movement.
Guide to performing straight rip cuts with the saw.
Instructions for making rip cuts at a bevel angle.
Steps for performing cross-cuts and mitre cuts.
Instructions for performing cross-cuts at a bevel angle.
To Next Page
