DeWalt DW310 - Technical Data; Definitions: Safety Guidelines; General Power Tool Safety Warnings

15
ENGLISH
EC-Declaration of Conformity
Machinery Directive
Reciprocating Saw
DW310, DW311
DeWALT
declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-11:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DeWALT
at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DeWALT
.
Markus Rompel
Director Engineering
DeWALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
29.03.18
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.

Denotes risk of electricshock.

Denotes risk offire.
General Power Tool Safety Warnings

WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
Congratulations!
You have chosen a
DeWALT
tool. Years of experience, thorough
product development and innovation make
DeWALT
one of the
most reliable partners for professional power toolusers.
Technical Data
DW310 DW311
Voltage V
AC
230 230
UK & Ireland V
AC
230/115 230/115
Type 2 2
Power input W 1200 1200
No-load speed 0–2600 0–2600
Stroke length mm 28 28
Cutting capacity in wood/metal
profiles/plastic tubes
mm 300/130 /160 300/130/160
Weight kg 4.2 4.2
Noise values and vibration values (triax vector sum) according to EN60745:
L
PA
(emission sound pressure level) dB(A) 90 89
L
WA
(sound power level) dB(A) 101 100
K (uncertainty for the given sound
level)
dB(A) 3 3
Vibration emission value a
h
,CW
= m/s
2
23.7 23.3
Uncertainty K = m/s
2
2.5 2.2
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of workpatterns.
English (original instructions)
RECIPROCATING SAW
DW310, DW311