To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DW45RN and is the answer not in the manual?
General| Brand | DeWalt |
|---|---|
| Model | DW45RN |
| Category | Power Tool |
| Language | English |
Wear safety glasses with side shields and use clean, dry, regulated air.
Always wear hearing protection to prevent potential hearing loss from product noise.
Use rated air hoses, avoid bottled gases, use pressure-relieving couplings, and disconnect when not in use.
Avoid accidental discharge, do not tamper with safety mechanisms, and inspect before use.
Do not point tool at others, keep bystanders away, keep fingers off trigger, and maintain balance.
Use only for intended purpose, avoid overreaching, and do not drive nails into unsuitable materials.
Be aware of material thickness, do not drive nails near edges, and avoid driving into other fasteners.
Grip firmly, be careful of double fires with contact trip, and use sequential trip trigger correctly.
Avoid flammable substances, disconnect air for depth adjustment, and work in well-ventilated areas.
Overview of tool parts and instructions for connecting air.
Keep fingers away from trigger, understand contact and sequential trip triggers.
Instructions for installing air fittings, including proper thread seal tape use.
Includes draining compressor, lubricating tool, and checking air supply and leaks.
Steps to open the tool, adjust platform, and load coil nails correctly.
Procedure to verify correct trigger and contact trip function without fasteners.
How to adjust the depth wheel for desired fastener setting.
How to use single fastener placement and rapid fastener operations.
Procedure for operating the tool with the sequential trip trigger.
Tests for trigger and contact trip function in various scenarios.
Tests for trigger and contact trip function for sequential operation.
How to adjust the shingle guide for precise placement.
Procedure to safely remove jammed nails from the tool.
Specific procedures for operating the tool in freezing temperatures.
Keep tool out of direct sunlight to prevent damage from excessive heat.
Lubrication and cleaning tasks for daily upkeep of the tool.
Guidance on product repairs and recommended accessories.
Benefits of registering your product online for warranty and safety.
Details of the warranty coverage, free service, and money-back guarantee.
Warranty information specific to products sold in Latin America.
Instructions for obtaining free replacement safety warning labels.
Troubleshooting air leaks near the trigger or bottom of the tool.
Solutions for a tool that does nothing or operates sluggishly.
Resolving issues with tool jams, skips, or incorrect fasteners.
