DeWalt DW505 - Specifications and Product Information; Recommended Capacities; Repair and Service Guidelines; Environmental Disposal

ENGLISH
7
MAXIMUM RECOMMENDED CAPACITIES
DW505
Chuck capacity 1/2" (13 mm)
R.P.M 0–1270 – 0–3000
Bits, metal drilling 1/2" (13 mm) low speed
Wood, flat boring 1–1/2" (38 mm) low speed
Bits, masonry drilling 3/4" (19 mm) soft materials
Hole saws 2–1/8" (53.9 mm) – Low speed
Repairs

WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement) should
be performed by a
DeWALT
factory service center
or a
DeWALT
authorized service center. Always use
identical replacementparts.
Protecting the Environment
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions.
SPECIFICATIONS
DW505-B3
Voltage: 120V~
Power-Watts: 800W
Frequency: 50-60 Hz
Power: 0–1270 / 0–3000/min
Strokes per minute: 0–21600 / 0–51000