ENGLISH
19 en - 1
WOODWORKER’S TABLE SAW DW746/DW746T
Congratulations!
You have chosen a DEWALT product. Years of experience, thorough
product development and innovation make DEWALT one of the most
reliable partners for professional users.
Table of contents
Technical data en - 1
EC-Declaration of conformity en - 1
Safety instructions en - 2
Package contents en - 3
Description en - 3
Electrical safety en - 3
Using an extension cable en - 3
Assembly and adjustment en - 3
Instructions for use en - 7
Maintenance en - 8
Guarantee en - 8
Technical data
DW746 DW746T
Voltage V 230 400
Power input W 2,700 3,700
Power output W 2,000 2,900
Blade diameter mm 250 250
Blade bore mm 30 30
Max. blade thickness mm 3.2 3.2
Max. blade speed min
-1
3,300 3,300
Ripping capacity at 90° (left/right) mm 370/730 370/730
Max. mitre angle (left and right) 60° 60°
Max. bevel angle (left/right) 47°/ 2° 47°/2°
Max. depth of cut at 0° bevel mm 79 79
Max. depth of cut at 45° bevel mm 54 54
Automatic blade brake time s < 10.0 < 10.0
Environmental temperature °C 5 - 40 5 - 40
Power factor (cos Ê) 0.98 0.91
Motor duty class S6 (40% on/60% off)
Motor insulation class F F
Protection class IP54 IP54
Dust extraction:
Required airflow m
3
/h 720 720
Pressure drop at connection output mbar 24 24
Recommended air velocity
- dry wood m/s 20 20
- wet wood m/s 28 28
Cross section diameter at connection outlet mm 100 100
Weight kg 124 126
Fuses:
Europe 230 V tools 16 Amperes, mains
400 V tools 16 Amperes, per phase
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
EC-Declaration of conformity
DW746
DEWALT declares that these Power Tools have been designed in
compliance with: 98/37/EEC, 89/336/EEC, EN 1870-1, EN 60204-1,
EN 55014-2, EN 55014, EN 61000-3-2 & EN 61000-3-11.
DW746T
DEWALT declares that these Power Tools have been designed in
compliance with: 98/37/EEC, 89/336/EEC, EN 1870-1, EN 60204-1,
EN 55014-2, EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DEWALT at the address below or
refer to the back of the manual.
Level of sound pressure according to 86/188/EEC & 98/37/EEC,
measured according to ISO 7960:1995 Annex A:
DW746 DW746T
L
pA
(sound pressure) dB(A)* 82 82
L
WA
(acoustic power) dB(A) 95 95
* at the operator’s ear
Take appropriate measures for the protection of hearing if the
sound pressure of 85 dB(A) is exceeded.
The sound levels stated are emission levels; they are not necessarily safe
working levels. Even though the measured values are related to exposure
levels, this information does not allow to determine if additional measures
are required. Factors that can affect the radiated levels are duration of
exposure, the characteristics of the work area and other sound sources,
as well as the number of machines of the same type or other machines in
the work area. The acceptable exposure levels may differ according to the
country of use. This information is only intended to help the user assess
possible risks.
TÜV Rheinland
Product and Safety GmbH (TRPS)
Am Grauen Stein 1
D-51105 Köln
Germany
Cert. No.
BM 9911798 01
Director Engineering and Product Development
Horst Großmann
DEWALT, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany
To Next Page
Loading...
