DeWalt DW872 - General Power Tool Safety Warnings; Work Area Safety; Electrical Safety; Personal Safety

6
ENGLISH
English (original instructions)
355 mm METAL CUTTING CHOPSAW
DW872
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
DW872
Voltage V
AC
230
UK & Ireland V
AC
230/115
Type 15
Power Input W 2200
No-load speed min
-1
1300
Blade diameter mm 355
Blade bore mm 25.4
Blade body thickness mm 1.8
Blade kerf thickness mm 2.2
No. of blade teeth 70
Cross-cutting capacity at 90˚
circular mm 130
square mm 100 x 100
rectangular mm 75 x 130
angular mm 92 x 92
Cross-cutting capacity at 45˚
circular mm 79
square mm 79 x 79
rectangular mm 79 x 123
angular mm 56 x 56
Weight kg 22.5
Noise values and vibration values (triax vector sum) according to EN61029-1,
EN61029-2-9:
L
PA
(emission sound pressure level) dB(A) 95.0
L
WA
(sound power level) dB(A) 108.0
K (uncertainty for the given sound level) dB(A) 3.0
Vibration emission value a
h
= m/s
2
< 2.5
Uncertainty K = m/s
2
1.5
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN61029 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of workpatterns.
EC-Declaration of Conformity
Machinery Directive
35 mm Metal Cutting Chopsaw
DW872
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN61029-1:2009+A11:2010, EN ISO 12100:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice President of Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
10.09.2020
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.