DeWalt DWE625 - Electrical Safety; Package Contents; Markings on Tool; Description (Fig. A)

8
ENGLISH
Description (Fig.A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
Speed control wheel
2
Main handles
3
On/off trigger switch
4
Thumb wheel
5
Height stop rod
6
Plunge lock lever
7
Quick release button
8
Spindle lock button
9
Collet assembly
10
Base plate
Date Code Position (Fig.A)
The date code
56
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2021XX XX
Year and Week of Manufacture
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual beforeuse.
g
Wear earprotection.
f
Wear eyeprotection.
n
Visible radiation. Do not stare intolight.
Package Contents
The package contains:
1 Router
1 Collet 12mm (1/2" UK & ROI)
1 Parallel fence
2 Guide rods
1 Guide bush (30mm)
1 22mm wrench
1 SA Dust extraction tube
1 Remote Switch Box (DWE627 only)
1 Instruction manual
1 Fine adjustment
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the ratingplate.
Your DeWALT tool is double insulated in accordance
with EN62841; therefore no earth wire isrequired.
The DWE625 LX (115V) is intended to be used with a safety
transformer manufactured to BSEN61558 and BS4343. Never
work without this transformer inplace.
If the supply cord is damaged, it must be replaced only by
DeWALT or an authorised serviceorganisation.
Mains Plug Replacement
(U.K.& Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the oldplug.
• Connect the brown lead t o the live terminal in theplug.
• Connect the blue lead to the neutralterminal.

WARNING: No connection is to be made to the
earthterminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse for 230V U.K. plug: 13A.
Fitting a Mains Plug to 115V Units
(U.K.and Ireland Only)
• The plug fitted should comply with BS EN 60309(BS4343),
32Amps.

WARNING: Always ensure that the cable clamp is
correctly and securely fitted to the sheath of thecable.
Using an Extension Cable
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data).The minimum conductor size is 1.5 mm
2
; the
maximum length is 30m.
When using a cable reel, always unwind the cablecompletely.
Residual Risks

WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA orless.
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment ofhearing.
• Risk of personal injury due to flyingparticles.
• Risk of burns due to accessories becoming hot
duringoperation.
• Risk of personal injury due to prolongeduse.
SAVE THESE INSTRUCTIONS