DeWalt DWE625 - Technical Data

ENGLISH
5
EC-Declaration of Conformity
Machinery Directive
DWE625, DWE627
Plunge Router
DeWALT declares that these products described under Technical
Data are in compliance with:
2006/42/EC, EN62841‑1:2015 + AC:2015; EN62841‑2‑17:2017.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice‑President Engineering, PTE‑Europe
DeWALT, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
08.09.2021
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of workpatterns.
DWE625 DWE625 DWE627
Voltage V
AC
115 230 230
Type 1 1 1
Power input W 2100 2300 2300
No‑load speed min
-1
9000 ‑
22000
9000 ‑
22000
9000 ‑
22000
Router carriage mm 2 column 2 column 2 column
Router carriage stroke mm 80 80 80
Max. cutting diameter mm 50 50 50
Collet size for Europe mm 12 12 12
Collet size for UK and ROI inch 1/2 1/2 1/2
Weight kg 6.1 6.1 6.2
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑17:
L
PA
(emission sound pressure level) dB(A) 94.2 95.1 95.1
L
WA
(sound power level) dB(A) 105.2 106.1 106.1
K (uncertainty for the given sound level) dB(A) 2.5 2.5 2.5
Vibration emission value a
h,hv
= m/s
2
4.1 3.1 3.1
Uncertainty K = m/s
2
0.31 0.31 0.31
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
PLUNGE ROUTER
DWE625, DWE627