DeWalt DWE7491 - TABLE SAW DWE7491; Technical Data; Safety Guideline Definitions

8
ENGLISH
Congratulations!
You have chosen a
DeWALT
tool. Years of experience, thorough
product development and innovation make
DeWALT
one of the
most reliable partners for professional power toolusers.
Technical Data
DWE7491-
XE
Voltage V
AC
230
Type
3
Motor power (input) W 2000
Motor power (output) W 1200
No load speed min
-1
4800
Blade diameter mm 254
Blade bore mm 16
Blade body thickness mm 1.75
Riving knife thickness mm 2.2
Depth of cut at 90° mm 79
Depth of cut at 45° mm 57
Bevel angle º 45–90
Maximum bevel angle º 43–92
Mitre angle º 30–90
Ripping capacity mm 825
Overall dimensions mm 680 x
650 x
330
Weight
kg 26.5
Noise values values (triax vector sum) according to EN62841-3-1:
L
PA
(emission sound pressure level) dB(A)
92.0
L
WA
(sound power level) dB(A)
105.2
K (uncertainty for the given
sound level)
dB(A)
2
The noise emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.

WARNING: The declared noise emission level represents
the main applications of the tool. However, if the tool is
used for different applications, with different accessories
or poorly maintained, the noise emission may differ. This
may significantly increase the exposure level over the total
workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of workpatterns.
EC-Declaration of Conformity
Machinery Directive
Table Saw
DWE7491
DeWALT
declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015 + AC:2015,
EN62841-3-1:2014 + AC:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DeWALT
at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DeWALT
.
Markus Rompel
Director Engineering
DeWALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
26.06.2018
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
English (original instructions)
TABLE SAW
DWE7491