INTRODUCTION
The
DWEHF1838K and DWLHF2025K are precision-built tools, designed for high
speed, high volume fastening. These tools will deliver efficient, dependable service when
used correctly and with care. As with any fine power tool, for best performance the
manufacturer’s instructions must be followed. Please study this manual before operating
the tool and understand the safety warnings and cautions. The instructions on installation,
operation and maintenance should be read carefully, and the manuals kept for reference.
NOTE: Additional safety measures may be required because of your particular application of the tool.
Contact your
representative or distributor with any questions concerning the tool and its
use.
Industrial Tool Co., 701East Joppa Road, Towson, MD 21286, call 1-800-4-
(1-800-433-9258) or visit our website: www.dewalt.com.
INDEX
Safety Instructions ..............................................3
Tool Components ...............................................4
Tool/Fastener Specifications .......................................5
Air Supply and Connections .......................................6
Loading the Tool ................................................7
Adjustment Instructions ...........................................8
Tool Operation.................................................10
Tool Operation Check ........................................... 11
Maintaining the Pneumatic Tool ...................................11
Troubleshooting ..............................................12
Maintenance Checklist...........................................13
Other
Flooring Products ..................................14
NOTE:
tools have been engineered to provide excellent customer satisfaction and are designed
to achieve maximum performance when used with precision
fasteners engineered to the
same exacting standards.
cannot assume responsibility for product performance
if our tools are used with fasteners or accessories not meeting the specific requirements
established for genuine
nails, staples and accessories.
SEVEN YEAR LIMITED WARRANTY
D
WALT will repair, without charge, any defects due to faulty materials or workmanship for seven years from the
date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail
of warranty coverage and warranty repair information, visit www.dewalt.com or call 1-800-4-D
WALT (1-800-
433-9258). This warranty does not apply to accessories or damage caused where repairs have been made or
attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in
certain states or provinces.
In addition to the warranty, D
WALT tools are covered by our:
1 YEAR FREE SERVICE
D
WALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year
after purchase. Nailer wear items, such as o-rings and driver blades, are not covered.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your D
WALT Power Tool, Laser, or Nailer for any
reason, you can return it within 90 days from the date of purchase with a receipt for a full refund – no questions
asked.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin
America, see country specific warranty information contained in the packaging, call the local company or see
website for warranty information.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call
1-800-4-D
WALT (1-800-433-9258) for a free replacement.
-2-
To Next Page
Loading...
