DeWalt XR DCF961 - Battery Type; Intended Use

ENGLISH
18
medical help. Liquid ejected from the battery may cause irritation
orburns.
e ) Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk ofinjury.
f ) Do not expose a battery pack or tool to fire or excessive
temperature. Exposure to fire or temperature above 130°C may
causeexplosion.
g ) Follow all charging instructions and do not charge
the battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage the battery
and increase the risk offire.
6) Service
a ) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool ismaintained.
b ) Never service damaged battery packs. Service of
battery packs should only be performed by the manufacturer or
authorised serviceproviders.
Impact Wrench/Driver Safety Warnings‑AllOperations
• Hold the power tool by insulated gripping surfaces when
performing an operation where the fastener may contact
hidden wiring. Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the
operator an electricshock.
• Wear ear protectors during use. Exposure to noise can cause
hearingloss.

WARNING: Impact wrenches are not torque wrenches.
DO NOT use this tool for tightening fasteners to specified
torques. An independent, calibrated torque measurement device
such as a torque wrench should be used when under-tightened or
overtightened fasteners can lead to the failure of thejoint.
Battery Type
These battery packs may be used:
Battery (kg) Battery (kg)
DCB546 1.08 DCB185 0.35
DCB547 1.46 DCB187 0.54
DCB548 1.46 DCB188 0.95
DCB549 2.12 DCB189 0.54
DCB181 0.35 DCB318 0.49
DCB182 0.61 DCB1880 0.98
DCB183/B/G 0.40 DCBP034/G 0.32
DCB184/B/G 0.62 DCBP518/G 0.75
Refer to the battery/charger manual for moreinformation.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual beforeuse.
g
Wear earprotection.
f
Wear eyeprotection.
n
Visible radiation. Do not stare intolight.
Date Code Position (Fig.A)
The production date code
11
consists of a 4-digit year followed
by a 2-digit week and is extended by a 2-digit factorycode.
Description (Fig.A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
Trigger switch
2
Forward/reverse control button
3
Anvil
4
Main handle
5
Battery pack release button
6
Battery pack
7
Worklight
8
Worklight switch
9
Mode selector
10
Hog ring
11
Date code
Intended Use
This impact wrench is designed for professional impact
fastening applications. The impact function makes this
tool particularly useful for driving fasteners in wood, metal
andconcrete.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
This impact wrench is a professional powertool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
withoutsupervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or mental
abilities; lack of experience, knowledge or skills unless they are
supervised by a person responsible for their safety. Children
should never be left alone with thisproduct.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal injury,
turn tool off and disconnect battery pack before making
any adjustments or removing/installing attachments or
accessories. An accidental start-up can causeinjury.

WARNING: Use only DeWALT batteries andchargers.
Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment ofhearing.
• Risk of personal injury due to flyingparticles.
• Risk of burns due to accessories becoming hot duringoperation.
• Risk of personal injury due to prolongeduse.
SAVE THESE INSTRUCTIONS