DeWalt XR FLEX VOLT DCC1054 User Manual

8
ENGLISH
Package Contents
The package contains:
1 Air compressor
2 Li‑Ion battery packs (T2 models only)
1 Charger (T2 models only)
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included
with N‑models.
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earand eyeprotection.
Air tankcapacity.
Approx. cut‑outpressure.
Airdisplacement.
Oil‑lesspump.
Set outlet pressure to zero before the air hose is
attached orremoved.
Risk of hightemperatures.
CAUTION: the compressor contains some parts
which might reach hightemperatures.
Risk of accidental start‑up.
NOTICE: The compressor could start
automatically in case of a black‑out and
subsequentreset.
WARNING: Compressor unit may start
withoutwarning.
Outdoor noise level
Important Information
Read and understand all of the operating instructions, safety
precautions and warnings in the Instruction Manual before
operating or maintaining this compressor. Most accidents that
result from compressor operation and maintenance are caused by
the failure to observe basic safety rules or precautions. An accident
can often be avoided by recognizing a potentially hazardous
situation before it occurs, and by observing appropriate safety
procedures. Basic safety precautions are outlined in the “SAFETY”
section of this Instruction Manual and in the sections which
contain the operation and maintenance instructions. Hazards
that must be avoided to prevent bodily injury or machine damage
are identified by WARNINGS on the compressor and in this
InstructionManual.
Date Code Position (Fig. A)
The date code
13
, which also includes the year of manufacture,
is printed on a label on the rear of thetank.
Example:
2017 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
Auto On/Off switch
2
Battery
3
Battery release button
4
Safety valve
5
Tank pressure gauge
6
One‑Turn regulator
7
Drain valve
8
Check valve
9
Quick‑connect coupler
10
Carry handle
11
Tank
Intended Use
Your compressor is designed for professional finish nailing and
staplingapplications.
DO NOT use under wet conditions or in the presence
of flammable liquids orgases. DO NOT use or store the
compressor at temperatures below 0°C.
Your compressor is a professional power tool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with thisproduct.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start‑up can causeinjury.

WARNING: Use only
DeWALT
battery packs andchargers.

DeWalt XR FLEX VOLT DCC1054 Specifications

General

Brand	DeWalt
Model	XR FLEX VOLT DCC1054
Category	Air Compressor
Language	English