Dexcom G7 - Page 70

Each
alert has its own settings. All of those settings are explained here:
Delay 1
st
Alert (High alert only): Turn on to delay your first alert until your sensor reading is at
or past the high alert setting for a while. You choose how long.
For example, if you set Delay 1
st
Alert to 20 minutes for your High alert, your glucose must be at
or above your high alert level for 20 minutes before you get the alert.
For More Than: Don't get an alert until a system issue lasts this long. You choose how long.
Fall Rate: For the Falling Fast alert, you choose the sensor reading change rate:
l
2–3mg/dL per minute or
l
3mg/dL or more per minute
For example, if you turn this on, when your glucose falls fast, you'll get an alert.
You can add a glucose level to this. If you do, you'll get an alert when your glucose is at or below
that level and falling fast.
62