EasyManua.ls Logo

Dexing NDS3306I - Chapter 4 Web NMS Management; 4.1 Login Procedure; 4.2 Operation Guide

Dexing NDS3306I
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NDS3306I 6 in 1 ISDB-T Modulator User Manual
8
Chapter 4 Web NMS Management
This device does not support the LCD operation, and the modification can only be operated
under Web NMS.
4.1 Login
The default IP address of this device is 192.168.0.136.
Connect the PC (Personal Computer) and the device with a net cable, and use ping
command to confirm they are on the same network segment. For instance, the PC IP address
is 192.168.99.252, we then change the device IP to 192.168.99.xxx (xxx can be 0 to 255
except 252 to avoid IP conflict).
Launch the web browser an input the device IP address in the browsers address bar and
press Enter.
It will display the Login interface as Figure-1. Input the Username and Password (Both the
default Username and Password are “admin”. And then click Login to start the device
setting.
Figure-1
4.2 Operation
4.2.1 Summary
When we confirm the login, it will display the summary interface as Figure-2.