30
Cycles
The cycle page allows you to add, edit, copy, delete, or reorder cycles.
Simple Cycle
Simple Cycle is a quick and easy way to set a time dry cycle on the control. Choosing Simple
Cycle allows a user to set the time and temperature of a cycle. It is recommended to keep
Simple Cycle as an option within the cycle list.
Legend
Edit Cycle Select anywhere on the cycle description (cycle name, target temp,
material, or target) to open the cycle details for editing.
Reorder Cycle Select and hold to move a cycle up or down in the listing. This will
change the order it is displayed on the control.
Copy Cycle
This will duplicate the cycle. Tip: It is easiest to edit an existing cycle
instead of creating a new cycle. Copy the cycle that is closest to the cycle you
want to create and edit that cycle. If a default cycle doesn’t meet your needs,
select “Add Cycle” and choose a default cycle from another application. You
can always change the cycle name in the edit section.
Delete Cycle This will delete an existing cycle.
Add Cycle
This will allow you to add a preset cycle from another industry or
another location.
Part # 8533-112-001 7/21
To Next Page
Loading...
Need help?
General
