31
Cycle Settings
A cycle can be edited by selecting on the cycle name in the Cycles page. The name and
language can be customized for that specic cycle.
Setting Options Description
Cycle Name User Entered Preset cycles come loaded with a name, but the user can
customize the name, including using other languages. See tip
below for more information.
Language Multiple Sets the language prompts for a cycle. This does not change
the language displayed in other sections nor does it change
the language in DexterLive. See tip below for more information.
Anti-Wrinkle
Protection
On / O When activated, anti-wrinkle will automatically tumble a load
every 5 minutes from when a cycle is complete to when the
door is open or for 12 hours after cycle completion. It is
important to keep anti-wrinkle ON since it reduces instances
of spontaneous combustion.
Cycle Type Auto Dry /
Time
Auto Dry cycles will utilize the moisture detection system
to determine the moisture level in a load, reducing the risk
of overdrying. Auto Dry cycles are programmed based
on the type of material being dried. Time cycles can be
programmed for time and temperature.
Material Type Cotton
Blend
Wool
Delicate
Synthetic
Ultra-Delicate
The type of material being dried is critical for Auto Dry cycles
as it determines the temperature and suggested relative
moisture remaining. See table below for temperatures by
material type.
Part # 8533-112-001 7/21
To Next Page
Loading...
Need help?
General
