39
Material Type Settings
Edit Stage – Auto Dry
Denitions and parameters:
Edit Cycle – Time Dry
Note: You cannot change between auto and time dry on the control, use DexterLive.com
To edit a cycle on the control, simply select the cycle you want to edit. See the reference below
for denitions and parameters. Note: Cycles or stages cannot be renamed on the control.
Denitions and parameters – Time Dry Cycles:
Material Type Temperature
Cotton 190
O
F / 88
O
C
Blend 160
O
F / 71
O
C
Wool 140
O
F / 60
O
C
Delicate 120
O
F / 49
O
C
Synthetic 140
O
F / 60
O
C
Ultra-Delicate No heat
Parameters Options Description
Temperature None Displays the set temperature for the cycle. Note:
This is controlled by the material type selected.
Moisture 0%, 1%, 3%, 5%,
7%, 10%, 15%,
20%, 25%
Sets the target moisture remaining level for the
cycle
Cooldown – Drying
Time
2 – 120 minutes Sets the cooldown time. Every cycle must have a 2
minute cooldown.
Parameters Options Notes
Language Various Changes the language of the prompts and
information displayed within the cycle. It does not
change the global language of the machine.
Anti-Wrinkle On / O Turns anti-wrinkle on or o at the end of that
cycle. Note: It is strongly recommended that anti-
wrinkle remains ON to avoid spontaneous combustion.
Part # 8533-112-001 7/21
To Next Page
Loading...
Need help?
General
