8514-219-001 REV E PAGE 20
time L.E.D. and the total dry time on the 4-digit numeric display will flash. If you press
and hold either the UP or DOWN touch pad switch, you will increment (UP arrow) or
decrement (DOWN arrow) through the total dry times available (1 through 60 minutes).
This displayed dry time includes the cool down time along with the heated time. To not
change the total dry time, do not press either the UP or DOWN touch pad switch. Go to
the next step.
5) Press and release the SELECT/ENTER touch pad switch on the dryer controller. Once the
SELECT/ENTER touch pad switch is pressed and released, the dry time L.E.D. will switch
off, the dry cycle L.E.D. and programming L.E.D. will remain on, the temperature L.E.D.
will illuminate, and the drying temperature will be shown on the 4-digit numeric display.
6) Press and release the UP or DOWN touch pad switch on the dryer controller to change the
drying temperature. Each press and release of the UP or DOWN touch pad switch will
either increase or decrease, respectively, the temperature by five degrees Fahrenheit or
three degrees Celsius, depending on how your dryer controller is set up. Once either the
UP or DOWN touch pad switch is pressed, the temperature L.E.D. and the drying
temperature on the 4-digit numeric display will flash. If you press and hold down either
UP or DOWN touch pad switch, you will increment (UP arrow) or decrement (DOWN
arrow) your way through the available drying temperatures (105
0
Fahrenheit or 40
0
Celsius,
up to 195
0
Fahrenheit or 91
0
Celsius). If you do not want to change the drying
temperature, do not press either the UP or DOWN touch pad switch. Go to the next step.
7) Press and release the SELECT/ENTER touch pad switch on the dryer controller. Once the
SELECT/ENTER touch pad switch is pressed and released, the temperature L.E.D. will
switch off, the dry cycle L.E.D. and programming L.E.D. will remain on, the cool down
L.E.D. will illuminate, and the cool down time will be shown on the 4-digit numeric display.
8) Press and release the UP or DOWN touch pad switch on the dryer controller to change the
cool down time. Once either the UP or DOWN touch pad switch is pressed, the cool down
L.E.D. and the cool down time on the 4-digit numeric display will flash. If you press and
hold down either the UP or DOWN touch pad switch, you will increment (UP arrow) or
decrement (DOWN arrow) through the cool down times available (2 through 60 minutes if
the controller has a red dot sticker or 2 through 15 minutes if the controller has no red dot
sticker). To not change the cool down time, do not press either the UP or DOWN touch
pad switches. Go to the next step.
9) Press and release the SELECT/ENTER touch pad switch on the dryer controller. Once the
SELECT/ENTER touch pad switch is pressed and released, the cool down L.E.D. and the
programming L.E.D. will switch off, and the dry cycle L.E.D. will remain on. The flashing
cool down time on the 4-digit display will stop flashing and remain.
10) At this point, you have two choices.
a. You can perform the modified dry cycle by pressing and releasing the START touch pad
switch on the dryer controller. If you start the modified cycle, the total dry time will
appear on the 4-digit numeric display and it will count down to 0 as the dry cycle
progresses.
b. You can clear the modified dry cycle program by pressing and releasing the STOP
touch pad switch on the dryer controller once. If you choose to clear the modified dry
cycle, the 4-digit numeric display will change to “LOAd”.
To Next Page
Loading...
Need help?
General
