Need help?Do you have a question about the Dexter Laundry Wn0900xa-12en2x-sskcs-usx and is the answer not in the manual?
General| Model Number | Wn0900xa-12en2x-sskcs-usx |
|---|---|
| Category | Washer |
| Capacity | 20 lb |
| Frequency | 60 Hz |
| Control Type | Microprocessor |
| Material | Stainless Steel |
| Type | Front Load |
| Voltage | 208-240V |
| Door Type | Front |
Defines DANGER, WARNING, CAUTION, and NOTICE symbols with their meanings.
Lists essential safety rules for operating and maintaining the washer.
Highlights critical warnings for safe operation and service.
Covers general installation requirements including foundation, plumbing, and electrical.
Details how to connect liquid chemical injection systems.
Explains how to use the washer's control switches and cycles.
Guides on editing existing wash cycles and understanding cycle times.
Lists and describes the 30 factory-programmed wash cycles.
Details the procedure for running a diagnostic test cycle.
Lists symptoms, probable causes, and suggested remedies for common issues.
Explains the operation and adjustment of the door lock assembly.
Instructions for removing and reassembling the tub back, bearing, and cylinder.
Covers removal and reassembly of pulley, bearing housing, seals, and tub back.
Instructions for removing and reassembling bearing housing for T-900/T-1200.
Procedure for removing and reassembling the outer tub for T-900/T-1200.
Instructions for adjusting maximum spin speed via VFD jumpers.
Identifies electrical components in the top compartment.
Describes operation of programmed temperatures and heaters.
Guide to programming water temperatures for heated baths.
Troubleshooting steps for heater relay engagement issues.
Procedure for calibrating the temperature control board.
Step-by-step instructions for installing the steam valve kit.
Troubleshooting guide for steam valve engagement issues.
Routine maintenance schedule including daily, quarterly, semi-annually, and annually.
To Next Page