Need help?Do you have a question about the Deye SUN-5K-SG04LP3-EU and is the answer not in the manual?
General| Model | SUN-5K-SG04LP3-EU |
|---|---|
| Type | Hybrid Inverter |
| Rated Output Power | 5000 W |
| Max. Output Power | 5500 W |
| Max. DC Input Power | 6500W |
| Max. DC Input Voltage | 500V |
| Number of MPPT Trackers | 2 |
| Max. Input Current per MPPT | 11 A |
| Nominal AC Voltage | 230 V |
| AC Voltage Range | 180-280V |
| Nominal AC Grid Frequency | 50/60Hz |
| Power Factor | 1 |
| THDi | < 3% |
| DC Switch | Yes |
| Topology | Transformerless |
| Battery Voltage Range | 40-60V |
| Max. Charging Current | 100 A |
| Max. Discharging Current | 100 A |
| Protection Degree | IP65 |
| Protection | Short Circuit Protection |
| Battery Type | Lead-acid |
| Communication | RS485 |
| Operating Temperature Range | -25 °C to +60 °C |
Crucial safety instructions for operating and maintaining the inverter, covering electrical hazards.
Detailed description of the hybrid inverter's components, ports, and indicators.
Specifications for the physical dimensions of the inverter and its mounting bracket.
Highlights key functionalities like multiple operation modes, protections, and connectivity options.
Diagram illustrating a typical system setup, showing connections between PV, battery, grid, and loads.
List of all items included in the inverter package for installation.
Guidelines for selecting an installation site and safely mounting the inverter on a wall.
Step-by-step instructions for connecting the battery, including wire size and torque specifications.
Explanation of various ports like BMS, Meter-485, CT, and Gen.
Procedures for safely connecting the inverter to the grid and backup load circuits.
Guidance on selecting PV modules and connecting them to the inverter's PV inputs.
Instructions for wiring Current Transformers (CTs) and external energy meters for monitoring.
Essential grounding procedures and setup for Wi-Fi communication for remote monitoring.
Illustrates overall wiring systems and typical integration with a diesel generator.
Details on powering the unit on/off and understanding the front panel indicators and buttons.
Explanation of the inverter's main screen, icons, and information display on the LCD.
Menus for configuring battery, work mode, grid, generator, and advanced settings.
Explores advanced settings, system modes, and viewing device information like firmware versions.
Explains system operation modes for basic setup and generator integration.
Details configurations for smart load management and AC coupling systems.
Comprehensive list of error codes, their descriptions, and suggested solutions for troubleshooting.
Pinout configurations for BMS and Meter-485 ports using RJ45 connectors.
Details and connection information for the RS232 port used with the Wi-Fi datalogger.
Provides the physical dimensions and specifications of the split core current transformer.
To Next Page