Need help?Do you have a question about the Deye SUN-5K-SG01/03LP1-EU and is the answer not in the manual?
General| Type | Hybrid Inverter |
|---|---|
| Rated Power | 5000 W |
| Max. PV Input Power | 6500 W |
| Max. DC Input Power | 6500 W |
| Max. PV Input Voltage | 500V |
| Number of MPPT | 2 |
| Max. AC Output Power | 5000 W |
| Max. AC Output Current | 22 A |
| Rated AC Voltage | 230 V |
| Rated AC Frequency | 50/60Hz |
| THDi | <3% |
| Peak Efficiency | 97.6% |
| Efficiency | 97.6% |
| DC Switch | Yes |
| Operating Temperature Range | -25°C to 60°C |
| Operating Temperature | -25°C to 60°C |
| Cooling Method | Fan |
| Protection Class | IP65 |
| Battery Type | Lithium-ion |
| Battery Voltage | 48 V |
| Battery Voltage Range | 40-60V |
| Max. Charging Current | 100 A |
| Max. Discharging Current | 100 A |
| AC Voltage Range | 180V-280V |
| Protection | Overvoltage, Short Circuit, Overload, Ground Fault |
| Communication | RS485 |
| Communication with BMS | CAN/RS485 |
| Model | SUN-5K-SG01LP1-EU / SUN-5K-SG03LP1-EU |
Details precautions and steps for properly mounting the hybrid inverter unit on a wall.
Explains the requirements and procedures for safely connecting the battery to the inverter.
Provides instructions for connecting the AC power source and output to the inverter, including breaker recommendations.
Details the procedures and precautions for connecting the photovoltaic (PV) modules to the inverter.
Emphasizes the mandatory grounding procedure to prevent electric shock and ensure safety.
Illustrates the overall wiring diagram for connecting solar, battery, grid, and loads to the inverter.
Describes the procedure for turning the hybrid inverter on and off using the power button.
Accesses various system configuration menus for the inverter.
Configures battery parameters, including type, capacity, charging, and discharging limits.
To Next Page