Need help?Do you have a question about the Deye SUN-5K-SG04LP1-EU-SM2 and is the answer not in the manual?
General| Model | SUN-5K-SG04LP1-EU-SM2 |
|---|---|
| Type | Hybrid Inverter |
| Brand | Deye |
| Rated Output Power | 5000W |
| Max. PV Input Power | 6500W |
| Number of MPPT | 2 |
| Max. Input Current per MPPT | 13A |
| Max. AC Output Power | 5000W |
| AC Output Voltage | 230V |
| AC Output Frequency | 50/60Hz |
| Grid Connection Type | Single-phase |
| Battery Voltage | 48V |
| Battery Voltage Range | 40-60V |
| Max. Charge/Discharge Current | 100A |
| Efficiency | 97.6% |
| Efficiency (Max) | 97.6% |
| Cooling Method | Fan cooling |
| Protection Degree | IP65 |
| MPPT Voltage Range | 125-550V |
| Max DC Input Current | 13A |
| Operating Temperature Range | -25°C to +60°C |
| Protection | Over Temperature |
| Communication | RS485 |
Details the process and precautions for securely mounting the inverter.
Explains the steps and considerations for connecting the battery.
Covers connecting the inverter to the power grid and backup load.
Describes how to connect photovoltaic (PV) modules to the inverter.
Illustrates the diagram for single-phase parallel inverter setup.
Illustrates the diagram for three-phase parallel inverter setup.
Overview of the system configuration and setup options.
Settings for battery type, capacity, charging, and discharging.
General settings for grid connection parameters.
Procedure for performing the CEI-021 standard self-check.
General information on handling inverter faults and errors.
Details specific error codes and their corresponding solutions.
To Next Page