- 02 -
CE EMC Compliance：The equipment can comply with CE EMC, which are designed
to protect against harmful interference in a residential installation. The equipment could
radiate radio frequency energy and this might cause harmful interference to radio
communications if not following the instructions when installing and using the equip-
ment. But there is no guarantee that interference will not occur in a particular installation.
If this equipment causes harmful interference to radio or television reception,the following
measures might resolve the issues:
A) Relocate the receiving antenna and keep it well away from the equipment.
B) Consult the dealer or an experienced radio / TV technical for help.
Changes or modifications not expressly approved by the party responsible for compliance
may void the user's authority to operate the equipment.
Radio Interference Statement
Please install isolation switching devices on the AC side of the inverter.
but maintain the protective earthing conductor in the branch circuit breaker connect
to the inverter ,then disconnect the DC inputs.
In any circumstance, do not connect DC input when AC connector is unplugged.
The Meaning of Symbols
Can be OEM Trademark.
Caution, risk of electric shock.
Caution, risk of burn - Do not touch.
Symbol for the marking of electrical and electronics devices according to
Directive 2002/96/EC. Indicates that the device, accessories and the
packaging must not be disposed as unsorted municipal waste and must
be collected separately at the end of the usage. Please follow Local
Ordinances or Regulations for disposal or contact an authorized
representative of the manufacturer for information concerning the
decommissioning of equipment.
Caution, hot surface.
To Next Page
Loading...
Need help?
General
