EasyManuals Logo

Deye SUN2000G3 User Manual

Deye SUN2000G3
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
- 03 -
CE mark is attached to the solar inverter to verify that the unit
follows the provisions of the European Low Voltage and EMC
Directives.
Refer to the operating instructions.
Person adequately advised or supervised by an electrically skilled person
to enable him or her to perceive risks and to avoid hazards which
electricity can create. For the purpose of the safety information of this
manual, a "qualified person" is someone who is familiar with
requirements for safety, refrigeration system and EMC and is authorized
to energize,ground, and tag equipment, systems, and circuits in
accordance with established safety procedures. The inverter and endues
system may only be commissioned and operated by qualified personnel.
Qualified
personnel
Microinverter System Introduction
The Microinverter is used in utility-interactive grid-tied applications, comprised of two
key elements:
· Microinverter
· Router
This series microinverter has built-in WIFI module so it can communicate with router
directly.
1300 / 1600 / 1800 / 2000G3
Meter
Distribution
Box
Ground
Neutral
PV
Module
Microinverter
Router
Monitoring system
WIFI Boost

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Deye SUN2000G3 and is the answer not in the manual?

Deye SUN2000G3 Specifications

General IconGeneral
ModelSUN2000G3
CategoryInverter
Max. Input Current13 A
Number of MPPTs2
AC Output Frequency50/60 Hz
CoolingNatural convection
Protection DegreeIP65
Nominal AC Output Voltage230V
Operating Temperature Range-25°C to 60°C
MPPT Efficiency99.9%
CommunicationWi-Fi

Related product manuals