EasyManua.ls Logo

DF-models Sky Watcher - Drone Charging Procedure; Charging the Drone Battery

DF-models Sky Watcher
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
It is crucial that all the propellers are installed in the correct position
(Pay attention to the letter A or B printed underneath each propeller.)
Drone’s details
Always use alkaline batteries
Never mix old and new batteries
.
.
4xAAA batteries
(not included)
1.Unscrew the battery cover,and insert 4xAAA batteries(not included),
making sure you insert them following the correct polarity as shown
2.Re-attach the battery cover
Propeller A
(Lockwise)
Propeller A
(Lockwise)
Propeller B
(Counter Clockwise)
Propeller B
(Counter Clockwise)
HEAD
Camera
4
5
1.Remove the battery from the drone and insert the battery into the
charging box.
2.Connect the charging box with USB charging cable, and insert the
battery charging wire into the USB slot of the computer. The battery
is under charging when the indicator led on the charger box lights up
RED.)
3.The battery is fully charged when the indicator led on the charging box
lights up GREEN.
Charging the drone battery
insert the battery
into charging box
Do not leave the battery unattended while charging & only use
the supplied battery or plug charger.
WARNING

Related product manuals