103
3
BIOS Setup
Intel RAID BIOS
The Intel RAID BIOS utility is used to configure and manage RAID
on Serial ATA drives.
After you power up the system and all drives have been detected,
the Intel RAID BIOS status message screen will appear. Press the
<Ctrl> and <I> keys simultaneously to enter the utility. The utility
allows you to build a RAID system on Serial ATA drives.
Refer to chapter 5 for steps in configuring RAID.
Important:
Before creating RAID, make sure you have installed the Serial
ATA drives and connected the data cables otherwise you won’t
be able to enter the RAID BIOS utility.
To Next Page
Loading...
