www.dfi .comChapter 7 Intel AMT Settings
61
Chapter 7
4. In the Save & Exit menu, select Save Changes and Reset and then press <Enter>.
A dialog box will appear. Select Yes and press Enter to reset the system after saving all
changes made.
Configure Intel
®
AMT in the Intel
®
Management Engine BIOS
Extension (MEBX) Setup Menu
Reset the system after
saving the changes
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Save Options
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Boot Override
Save Setting to fi le
Restore Setting from fi le
Chipset
Advanced
Main
Security
Boot
Save & Exit
Select Screen
Select Item
Enter: Select
+/
- :
Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
1. When the system reboots, the following message will be displayed. Press <Ctrl + P> as
soon as the message is displayed; as this message will be displayed for only a few sec-
onds.
Version 2. 20. 1271. Copyright (C) 2019 American Megatrends, Inc.
BIOS Date: 01/25/2019 13:27:47 Ver: B191.25A
Press <Ctrl + P> to Enter MEBX setup menu
Press <DEL> to enter setup.
American
Megatrends
To Next Page
Loading...