EasyManua.ls Logo

DFI CH960-CM246 - Specification Comparison Table

DFI CH960-CM246
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.d .comChapter 2 Concept
9
Chapter 2
Specification Comparison Table
5
Indicates 12V-tolerant features on former VCC_12V signals.
6
Cells in the connected columns spanning rows provide a rough approximation of features
sharing connector pins.
The table below shows the COM Express standard specifications and the corresponding specifications supported on the CH960-CM246/QM370/HM370 module.
Connector Feature
COM Express Module Base Specification
Type 6
(No IDE or PCI, add DDI+ USB3) Min / Max
DFI CH960
Type 6
A-B
A-B PCI Express Lanes 0 - 5 1 / 6 6
A-B LVDS Channel A 0 / 1 1
A-B LVDS Channel B 0 / 1 1
A-B eDP on LVDS CH A pins 0 / 1 1
A-B VGA Port 0 / 1 1
A-B TV-Out NA NA
A-B DDI 0 NA NA
A-B
5
Serial Ports 1 - 2 0 / 2 2
A-B CAN interface on SER1 0 / 1 0
A-B SATA / SAS Ports 1 / 4 4
A-B AC’97 / HDA Digital Interface 0 / 1 1
A-B USB 2.0 Ports 4 / 8 8
A-B USB Client 0 / 1 0
A-B USB 3.0 Ports NA NA
A-B LAN Port 0 1 / 1 1
A-B Express Card Support 1 / 2 2
A-B LPC Bus 1 / 1 1
A-B SPI 1 / 2 1
A-B
SDIO (muxed on GPIO) 0 / 1 NA
General Purpose I/O 8 / 8 8
A-B SMBus 1 / 1 1
A-B I2C 1 / 1 1
A-B Watchdog Timer 0 / 1 1
A-B Speaker Out 1 / 1 1
A-B External BIOS ROM Support 0 / 2 1
A-B Reset Functions 1 / 1 1
A-B
6
System I/O
System Management
Module Pin-out - Required and Optional Features C-D Connector.
Module Pin-out - Required and Optional Features A-B Connector.
Connector Feature
COM Express Module Base Specification
Type 6
(No IDE or PCI, add DDI+ USB3) Min / Max
DFI CH960
Type 6
A-B
A-B Thermal Protection 0 / 1 1
A-B Battery Low Alarm 0 / 1 1
A-B Suspend/Wake Signals 0 / 3 2
A-B Power Button Support 1 / 1 1
A-B Power Good 1 / 1 1
A-B VCC_5V_SBY Contacts 4 / 4 4
A-B
5
Sleep Input 0 / 1 1
A-B
5
Lid Input 0 / 1 1
A-B
5
Fan Control Signals 0 / 2 1
A-B Trusted Platform Modules 0 / 1 1 (optional)
A-B
A-B VCC_12V Contacts 12 / 12 12
Power Management
Power
Connector Feature
COM Express Module Base Specification
Type 6
(No IDE or PCI, add DDI+ USB3) Min / Max
DFI CH960
Type 6
C-D
PCI Express Lanes 16 - 31 0 / 16 16
PCI Express Graphics (PEG) 0 / 1 1
Muxed SDVO Channels 1 - 2 NA NA
PCI Express Lanes 6 - 15 0 / 2 2
PCI Bus - 32 Bit NA NA
PATA Port NA NA
LAN Ports 1 - 2 NA NA
DDIs 1 - 3 0 / 3 3 (DDI3 option)
USB 3.1 Ports 0 / 4 4
C-D
C-D VCC_12V Contacts 12 / 12 12
Power
C-D
6
C-D
6
System I/O
qp