DFI CS630-H310 - Page 36

www.dfi .com
36
Chapter 3 BIOS Setup
Chapter 3
Select 0-23 For example
enter 3 for 3am and 15
for 3pm
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
RC ACPI Settings
Wake system from S5
Wake up hour
Wake up minute
Wake up second
Advanced
[Enabled]
0
0
Wake up hour
Enter hour from 0 to 23.
Wake up minute
Enter minute from 0 to 59.
Wake up second
Enter second from 0 to 59.
 Select Screen
 Select Item
Enter: Select
+/
- :
Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
0
CPU Configuration
This section is used to configure the CPU.
When enabled, a VMM
can utilize the additional
hardware capabilities
provided by Vanderpool
Technology.
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
Advanced
 Select Screen
 Select Item
Enter: Select
+/
- :
Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
[Enabled]
[All]
[Enabled]
CPU Confi guration
Intel (VMX) Virtualization
Technology
Active Processor Cores
Hyper-Threading
Intel (VMX) Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hardware capabili-
ties provided by Vanderpool Technology.
Active Processor Cores
Select number of cores to enable in each processor package: all, 1, 2, 3, 4 or 5.
Hyper-threading
Enables this field for Windows XP and Linux which are optimized for Hyper-Threading
technology. Select disabled for other OSes not optimized for Hyper-Threading technol-
ogy. When disabled, only one thread per enabled core is enabled.