Welcome to DFRobot: www.DFRobot.com.cn 16 / 49
‘void loop ()’, provided for repeatable programs. These repeatable programs of the board
contribute to real-time interaction with the externals.
The write area in the iamge is for programing. The black area is information window, shows the
information of uploading/ verifying /compiling.
You can set information related by click File->Page Setup.
STEP6: upload codes to FireBeetle-ESP32.
In this step, an example process Blink of FireBeetle Board-ESP32 will be represented to you. Blink
controls the LED light of D9 flash in every one second. Same as many Arduino boards, FireBeetle
Board-ESP32 has a LED light, D9. Therefore, no other peripheral object is needed. LED’s status
indicator can be found in the mother board of FireBeetle Board-ESP32.
Please confirm the accuracy of the codes in priority before uploading. Please click
verify/compile to confirm.
Caution: the example code of Blink is in File>Examples>Basics>Blink.
To Next Page
Loading...