DFRobot YDLIDAR GS2 - Page 5

GS2 DRIVER VERSION SELECTION
Double-click the exe file and follow the prompts to install it.
GS2 DRIVER INSTALLING
After the installation is complete, right-click on [My Computer] and select [Properties]. On the
open [System] screen, select [Device Manager] from the left menu to access the [Device Manager].
Expand [Port] to see the serial port name corresponding to the identified USB adapter, that is,
the driver installation is successful. The following figure shows COM3. (Note that the port must be
checked in case of GS2 and PC interconnection).
3 / 11