EasyManua.ls Logo

DGFLOW Steadypres - User Manual

DGFLOW Steadypres
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
IT
VARIATORE
ELETTRONICO
DI FREQUENZA
EN
VARIABLE
FREQUENCY DRIVE
DGFLOW srl
Via Emilia, 5 - 46030 Bigarello (Mantova) Italy
tel. +39 0376 340922 - fax. +39 0376 249525
info@dgflow.it - www.dgflow.it
Made in Italy by
10011707A
PUMP INVERTER

Questions and Answers

  • T
    Tanya DukeAug 3, 2025
    Why DGFLOW Steadypres Controller pump does not switch on?
    • E
      Elizabeth BarajasAug 4, 2025
      The DGFLOW Controller pump might fail to switch on due to several reasons: * **Electric power supply cut-off:** Restore the electric power supply. * **Fuses burned:** Replace the fuses. * **Intervention of the line protections:** Check the correct calibration of the protections, identifying and removing the cause.
  • M
    Madison RiveraAug 13, 2025
    How to fix DGFLOW Steadypres Controller when the pump does not start?
    • F
      Francisco YorkAug 13, 2025
      If the DGFLOW Controller pump isn't starting, here's what you should check: 1. **The pump is out of service (put out of service manually):** Push ON + ENTER to put the pump back into service. 2. **The pump is out of service due to dry running anomaly:** Identify and remove the cause of the alarm DRY RUNNING. 3. **Motor breakdown:** Remove the pump and replace the motor. 4. **Pump blocked:** Remove the pump, identify and eliminate the block.
  • J
    Jeffery GardnerAug 23, 2025
    Why differential switch intervention to protect the DGFLOW Steadypres inverter power supply line?
    • S
      Sarah KimAug 23, 2025
      The differential switch might be intervening because it is inadequate for inverter power supply. To solve this, replace the differential switch with a model suitable for the buttons and in direct current (class A).

Summary

Safety Standards

General Safety Warnings

General safety instructions and symbols warning of risks.

Installation and Maintenance Responsibility

Outlines responsibilities for qualified staff and manufacturer's liability.

Product Description

System Features

Installation

Single-Phase Power Supply Connection

Instructions for connecting the inverter to the single-phase power supply.

Electric Pump Connection

How to connect the pump to the inverter for single-phase and three-phase outputs.

Configuration of the Parameters

Starting Up

Start-up Phase

Describes the initial 10-second start-up phase and system behavior.

Manual Test Procedure

Procedure for manually starting, modulating, and stopping the pump for testing.

Maintenance

Alarms Overview

Lists common alarms, their causes, and system responses.

Over Current Alarms

Details the "OVER CURRENT" and "INVERTER ERROR" alarms.

Over Temperature Alarms

Explains "HIGH TEMPERATURE" and "OVER TEMPERATURE" alarms.

Dry Running Alarm

Describes the "DRY RUNNING" alarm and automatic restart attempts.

Communication Error Alarm

Explains the "COMMUNICATION ERROR" alarm.

Troubleshooting Guide

A table listing common problems, their causes, and recommended interventions.

Troubleshooting Guide (English)

English version of the troubleshooting table.

DGFLOW Steadypres Specifications

General IconGeneral
BrandDGFLOW
ModelSteadypres
CategoryController
LanguageEnglish

Related product manuals