DGSHAPE CA-DK2 - Before Use; Checking the Included Items; Items to Prepare Yourself

Checking the Included Items
The following items are included with the kit. Make sure they are all present and accounted for.
CA-DK2-FX (15)
CA-DK2-TR (15) Dedicated milling burs*1
Silicone stands (2)
*1: ZRB-150D, ZPB-100D, ZPB-50D, ZPB-30D
Memo
The CA-DK2-FX, CA-DK2-TR, and dedicated milling burs can be purchased separately.
Items to Prepare Yourself
• Items included with the machine
Adapter (1)
Torque screwdriver (1)
• Materials, equipment, etc.
¾
Room-temperature polymerizing resin or heated polymerizing resin
¾
Pressure pot
¾
Stand for adjusting the position of the polymerizing resin (This is used when adjusting the resin height during polym-
erization.)
¾
Spatula (This is used when mixing together the powder and the liquid.)
¾
Container (This is used when mixing together the powder and the liquid.)
¾
Lidded container (This is used when mixing together the heated polymerizing resin powder and the liquid.)
¾
Tissue paper (This is used to absorb the heated polymerizing resin's excess liquid layers.)
¾
Polyethylene sheet (This is used to keep ngers from coming into contact with the heated polymerizing resin's excess
liquid layers.)
¾
Vibrator (This is used to extract air bubbles from the container after the powder and the liquid have been mixed to-
gether.)
¾
Acrylic resin adhesive (This is used to a󱐰x the CA-DK2-FX, the CA-DK2-TR, and articial teeth.)
¾
Brush/eye dropper (This is used to apply adhesive.)
¾
Articial teeth
Before Use
2