DHP 3137096 User Manual

STOP
DO NOT RETURN PRODUCT TO THE
STORE
Individual stores do not stock parts.
If a part is missing or damaged, call our
toll-free customer service line. We will
gladly ship your replacement parts FREE
of charge.
Need Parts or Assistance?
1-800-267-1739
www.dhpfurniture.com
For prompt, reliable service; please have your assembly
manual ready.
Date of Purchase
___ / ___ / ___
Lot Number
_________
or access our website
WARNING
• WARNING FOR YOUNG CHILDREN - This product contains small components, please ensure that they are kept away from small children. Children under
the age of 5, small infants and babies must not sleep on this bed for safety reasons. To prevent injury and damage to this unit, PROHIBIT jumping on it.
• This product is designed for home use and not intended for commercial use.
• The futon has been designed for seating and as an alternate sleep product for up to two (2) average adults.
• KEEP FINGERS CLEAR OF THE MECHANISM when opening or closing the futon. Lift the futon seat from the front to open; Pull up the back of the futon
from the rear to close
• Recommended # of people needed for assembly 2 (however it is always better to have an extra hand.) Estimated assembly time is 2 hours.
• THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE
3137096
B34313709605-10125-M
W
a
r
n
i
n
g
l
a
b
e
l
W
a
r
n
i
n
g
l
a
b
e
l
Weight Limits:
225 Lbs
102 Kgs
600 Lbs
272 Kgs
BLACK TWIN \ FUTON BUNK BED

DHP 3137096 Specifications

General

Brand	DHP
Model	3137096
Category	Indoor Furnishing
Language	English

Summary

Product Safety Warnings

General Safety Precautions

Crucial warnings for young children, product use, and preventing injury.

Pre-Assembly Guidance

Assembly Preparation Steps

Read steps carefully, check parts, use a spacious area, and avoid power tools.

Helpful Assembly Hints

Tips for assistance, moving furniture, and additional parts availability.

Parts Identification

Structural Components

Diagrams and labels for posts, rails, and bed frames.

Bedding and Support Parts

Identification of slats, middle rails, and bed frames.

Mechanisms and Accessories

Details on ladder, mechanisms, plugs, stoppers, hooks, and connectors.

Hardware and Tools

List of bolts, nuts, screws, washers, and assembly tools.

Assembly Instructions

Step 1: Assemble End Frames

Attach connectors to posts and post rails to create two end assemblies.

Step 2: Attach Side Rails and Mechanisms

Connect side guard rails, lower side rails, and mechanisms to posts.

Step 3: Install Safety Rails and Ladder

Attach safety rails and ladder to the main frame structure.

Step 4: Install Upper Slats

Attach upper slats to safety rails and secure with plastic plugs.

Step 5: Assemble Lower Bed Frames

Connect lower bed frames and middle rail to frame connectors.

Step 6: Install Lower Slats

Attach lower slats to bed frames and secure with plastic plugs.

Step 7: Attach Bed Frames to Mechanisms

Connect lower bed frames to mechanisms and attach stoppers/hooks.

Product Usage and Conversion

Converting to Bed Mode

Instructions on how to set up the bunk bed for sleeping.

Converting to Futon Mode

Instructions on how to convert the bunk bed into a futon.