Why is the power button blinking red on my Diamond Coral WATERBAR+?
The power button on your Diamond Commercial Food Equipment is blinking red because the water tank is low on water. Refill the water tank to resolve this.
How to turn on hot water on Diamond Coral WATERBAR+ Commercial Food Equipment?
To enable the hot water function on your Diamond Commercial Food Equipment, ensure the hot water button is turned “ON” and the indicator light is “green.”
How to unlock hot water on Diamond Coral WATERBAR+ Commercial Food Equipment?
To unlock the hot water on your Diamond Commercial Food Equipment, gently press the ON button.
What to do if water is leaking from the bottom of my Diamond Coral WATERBAR+?
If water is leaking from the bottom of your Diamond Commercial Food Equipment, the water tank adaptor’s tube might not be installed correctly. Unplug the water tank adaptor, reinstall it, and check the tube. If the issue persists, contact customer service.
What to do if hot, warm, or normal water automatically stops on Diamond Commercial Food Equipment?
If the hot, warm, or normal water is automatically stopping on your Diamond Commercial Food Equipment, the water tank adaptor might not be installed properly. Unplug the water tank adaptor and reinstall it. If the issue continues, please contact customer service.
Why does my Diamond Coral WATERBAR+ have a sudden splashing for the first cup?
The sudden splashing on your Diamond Commercial Food Equipment for the first cup occurs because air or bubbles are trapped inside the hose after the filter water level has reached its minimum before refilling. This is a temporary phenomenon that will stop once the bubbles are gone.
Why is the water flow not smooth in my Diamond Coral WATERBAR+ Commercial Food Equipment?
The water flow in your Diamond Commercial Food Equipment may not be smooth if the water tank wasn't correctly installed after refilling. Ensure that the electric cable is not bent and is properly installed under the water tank adaptor.
How to fix bad taste and odor in Diamond Commercial Food Equipment water?
To fix bad taste or odor in the water of your Diamond Commercial Food Equipment, clean the water tank and fill it with fresh, purified water. Then, flush the machine with 2-3 cups of hot water.
Symbol indicates risk of personal injury from the appliance.
Symbol alerts that appliance parts may become hot during operation.
Details on power, size, weight, and water temperature/yield specifications.
Identifies buttons, drip tray, and overall front layout of the water bar.
Identifies rear connections like power cord and filter water inlet.
Essential checks regarding placement, environment, and space before installation.
Steps for the first-time installation, focusing on cleaning the water tank.
Instructions on how to correctly install the water tank adaptor and connect the power cord.
Guide on refilling the water tank with purified water and attaching it.
How to switch the unit ON/OFF and understand its status indicators.
Procedures for dispensing hot, warm, and normal water using the buttons.
Guidance for initial operation and automatic shutdown when water level is low.
Visual guide showing correct and incorrect cup placement for water collection.
Instructions on how to clean the water bar panels and empty the drip tray.
Guidelines for plugging into the correct outlet and avoiding multi-device connections.
Recommendations for handling damaged power cords and ensuring safe electrical operation.
Key precautions to prevent device malfunction and ensure safe operation.
Safety advice regarding children, supervision, and suitable environments for use.
Solutions for water having a bad taste or odor, often due to long periods of non-use.
Troubleshooting for uneven water flow and splashing during the first cup.
Advice for when water dispensing stops automatically or leaks occur at the bottom.
Solutions for unresponsive hot water function and blinking power indicator lights.
Regional service hotlines and email addresses for customer assistance.
General| Category | Commercial Food Equipment |
|---|---|
| Type | Water Dispenser |
| Voltage | 220-240V |
| Power Supply | AC |
| Display | LED |
| Model | WATERBAR+ |
| Water Temperature Options | Hot, Cold |
| Cooling System | Compressor |
| Material | Stainless Steel |
| Power Consumption | 500W |
| Safety Features | Child Lock, Overheat Protection |
To Next Page
