47
REK31E
Parameter Description
REK31
d1 Main Set point 2 ºC
d2 Differential ( hysteresis ) 3 ºC
d3 lower limit of main set point 2 ºC
d4 Upper limit of main set point 10 ºC
d5 Minimum time interval between the disactivation and successive activation on compressor 99sec.
d6 Max temperature alarm differential 50 ºC
d7 Maximum or minimum temperature alarm delay 0
d8 Time interval between defrost cycle 6h
d9 Max defrost cycle time 20min
d12 Real temperature display delay at defrost end 30 min
d14 Dripping time 1min
d19 Offset ? -4 ºC
d22 Unit of measure, 0=C, 1=F 0
d23 Compressor function during o probe failure 2
d24 Compressor on-time during probe failure 10 min
d25 Compressor off-time during by probe failure 10 min
d38 Minimum temperature alarm differential 40 ºC
To Previous Page
Loading...
