910Ef Owner’s Manual
13
FINAL INSTALLATION & SET UP
• Moving and posi oning the unit. Move the 910Ef into the
desired fi nal posi on by carefully raising the rear end of the
unit un l the red wheel located on the front stabilizer contacts
the fl oor. Leave room around the unit for safe opera on and
suffi cient air fl ow.
• Leveling the unit. Level the unit by rota ng the six leveling feet
(D-40) located in the stabilizer bars. Lock the feet into posi on
by ghtening the lock nut (D-39) upward, against the frame.
• Plug one end of the power adaptor (K) into a 120V power
source. Plug the opposite end into the power input jack found
on the front end of the plas c housing near the stabilizer.
ASSEMBLY INSTRUCTIONS
To Next Page
Loading...
