To Next PageTo Next PageWhat to do if sample applied after Diatesse Blood Glucose Meter switched off?
If the sample was applied after the Diatesse Blood Glucose Meter switched off, repeat the test with a new test strip. Make sure to apply the blood sample when the symbol appears on the display.
How to select measurement modes for blood sugar and ketone tests.
Conditions requiring a test with control solution to verify meter and strip accuracy.
Step-by-step guide for performing a test using the control solution.
Instructions for preparing the lancing device for blood sample collection.
Steps to establish a Bluetooth connection between the meter and a smartphone.
Explanation of error codes displayed by the meter and recommended actions.
General| Blood Sample | Capillary whole blood |
|---|---|
| Measuring Time | 5 seconds |
| Memory | 500 results |
| Measuring Range | 20-600 mg/dL |
| Power Source | 1 x 3V CR2032 lithium battery |
| Sample Volume | 0.5 µL |
| Weight | 60g |
| Battery | CR2032 |
| Operating Conditions | 10-40°C, 10-85% RH |
