15
4､
地贝清洁 时尚便捷
Product MaintenanceProduct Maintenance
Clean side brush, rolling brush and mop
Notes:
Remove the rolling brush from the main body by pressing the lock and wash it.
Clean side brushes, rolling brush and mop once getting dirty. Replace them once damaged.
Remove the mop from the water tank and wash it with water.
Clean dust bin and filters
Clean the dust bin and filters as following tips after every use.
check the suction and clean the obstacles
Notes:
wash the primary filter every 15-30 days and install it after drying
clean the HEPA filter with wet mop instead of washing it with water directly
Clean sensors and charging poles
clean the sensors and charging poles with soft dry mop cloth as followed:
To Next Page
Loading...
