To Next PageTo Next Page
Need help?Do you have a question about the Dibo IBH-S and is the answer not in the manual?
General| Brand | Dibo |
|---|---|
| Model | IBH-S |
| Category | Pressure Washer |
| Language | English |
Indicates electrical components and handling precautions.
For working with chemical/detergent additives and associated risks.
Indicates operations that can cause fire and associated dangers.
Highlights dangers related to hot surfaces and heat.
Indicates danger from hand/arm vibrations causing injury.
Use approved parts, check pressure/temperature, beware of tripping hazard.
Dangerous jet. Do not aim at persons, animals, or electrical installations.
Warning against spraying electric installations with water due to shock risk.
Mandatory use of security clothing, optical device, and hearing protection.
Stop engine to change lance. Protect nozzle. Hold lance with both hands.
Safe operation, ventilation, tyre cleaning, avoid hazardous substances.
Avoid flammable products. Follow instructions. Use PPE.
Avoid bad posture, consult doctor for skin penetration, state product type.
Use specified fuel. Do not touch burner kettle. Never refuel near heat source.
Ensure air supply, flue gas extraction. Prevent back pressure.
Long use can cause physical ills. Use protective gloves, take medical check-ups.
Aerosols are harmful. Take precautions like dust masks.
Apply hand brake and use wheel blocks when uncoupling trailer.
Check essential parts, electrical connections, rinse hoses and gun before start-up.
Connect water, hoses, gun. Aim spray gun, serve until water is de-aerated.
Red warning light indicates errors. Flashing frequency denotes error type.
Switch off main switch, operate gun to release pressure, uncouple lance.
Maintenance on disconnected machine. Use approved parts. Assemble securities after.
Diagram for daily and periodic maintenance activities.
Schedule for periodic checks and tasks like oil change and filter cleaning.
Check oil level glass. Top up if needed. Milky oil needs expert consultation.
Check connections, seals, leaks, oil level. Repair if needed.
Table listing common malfunctions, their causes, and recommended solutions.
