BEFORE COMMISIONING EN
DiBO 15
FILLING THE FUEL TANK
The cleaner will be delivered with empty fuel tank, fill the tank with the right
fuel before the first use. Avoid mess of fuel, certainly on warm machine parts.
Respect the fill capacity of the fuel tank. Fill the tank with gasoline/petrol. Use
clean, fresh, unleaded gasoline. A minimum of 87 octane/87 AKI or higher -
RON: min. 90. Gasoline with up to 10% ethanol (gasohol) - 90% lead-free is
acceptable.
Pay attention: fuel can become stale when stored over
30 days. Do not mix oil in gasoline or modify the engine
to run on alternate fuels.Don’t use unsuitable fuel! See
technical data for tank volume and fuel type.
Turn engine o and let engine cool at least 2 minutes before
removing the fuel cap to refill! Keep fuel away from sparks,
open flames, pilot lights, heat, and other ignition sources ->
fuel and its vapors are extremely flammable and explosive! If
fuel spills, wait until it evaporates before starting engine.
To Next Page
Loading...
