DieHard 200.71988 - PRODUCT Features

• 2 •
DIEHARD PORTABLE POWER 1150 2.
JUMP-STARTER/DC POWER SOURCE
1. JUMP START ON/OFF Switch.
Turn on to activate clamps and
USB.
2. Inverter/Compressor switch. This
switch turns the inverter or air
compressor on and off.
3. Digital Display – indicates internal
and vehicle’s battery percentage of
charge and displays a code when
improperly connected to battery.
The display also shows power out
when using the inverter.
4. Plastic lens cover
5. Two, light bulbs
6. Two, 12V DC power outlets
7. Two, 110V AC household power
outlets.
8. USB port
9. Power Switch (Light/Display). This
switch turns on the light or the in-
ternal battery status digital display.
10. Air compressor gauge
11. Air compressor hose
12. Air compressor accessory bag
13. Aircompressorballination
adapter
14. Two, air compressor miscella-
neousinationadapters
15. ON/OFFinator/deatorswitch
16. High-owinatoroutlet
17. Inator/deatorhoseendadapter
18. High-owdeatoroutlet
19. Inator/deatorhose
20. Two cables with clamps
21. Male-to-male accessory 12V
charging connector
22. Threeinator/deatorhosedevice
adapters.
23. Wall Charger
1
9
3
8
7
6
5
4
1
2
3
4
5
6
7
8
9
22
10
18
16
17
21
15
19
13
14
12
11
20
23