EasyManua.ls Logo

DieHard 71686 - 12 V Device Power Issues; Battery Charge Holding Issues

DieHard 71686
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
• 8 •
PROBLEM POSSIBLE CAUSE SOLUTION
The Portable Power
won’t power my 12V
device.
The 12V device is not
turned on.
The Portable Power’s
battery is not charged.
The 12V device draws
more than 15A or has a
short circuit.
Turn on the 12V device.
Check the battery charge
status by pressing the
Battery Status button.
Disconnect the 12V device.
The internal breaker will
automatically reset after a
minute or two. Try the 12V
device again.
The battery in the
Portable Power won’t
hold a charge.
The battery is bad (will not
accept a charge).
Have the battery checked.
8. BEFORE RETURNING FOR REPAIRS
When an UNKNOWN
OPERATING PROBLEM arises,
please read the complete manual
and call the customer service
number for information. This will
usually eliminate the need for
return.
If the above solutions do
not eliminate the problem,
or for information about
troubleshooting
or replacement parts, call
toll-free from anywhere in the
U.S.A.: 1-800-621-5485.
9. ACCESSORIES
Male-to-male accessory cable ......................................................94500109

Related product manuals