13
5 Safety Precautions - General Information
Maintaining the Planetary Drive
• All maintenance should be performed with the engine turned o, parking brakes applied,machine arms
lowered, and hydraulic pressure relieved.
• If lift arms must be left raised for any reason, use a positive lift arm lock to secure the arms in place.
Serious damage or personal injury could result from lift arms accidentally lowering.
• Never adjust a relief valve for pressure higher than recommended by the machine’s manufacturer.
Transporting the Planetary Drive
• When transporting your attachment, follow all local government regulations that may apply along with
any equipment safety precautions provided in this manual.
• It is the responsibility of the operator that safe systems of work are employed while handling this
attachment.
• No tie down points are provided on the attachment and its the responsibility of the operator to ensure
that the attachment is rmly fastened without causing any damage to it.
• Attachment should be well secured, when being moved or in transit and furthermore prior to moving,
storing, loading/unloading,or parking.
• Verify that all tie down accessories (chains, slings, ropes, and shackles etc.) are capable of maintaining
attachment stability during transporting and are attached in such a way to prevent unintended
disengagement or shifting of the unit.
• Use extra care when loading or unloading the attachment on to a trailer or truck and disconnect hydraulic
couplers during the transportation. No responsibility for loss or damage to persons or property in any
regard can be attributed to Digga.
All bystanders should be kept at a minimum of 6 meters (20 feet) away from the working area of the Auger drive.
DANGER
To Next Page
Loading...
