19
The key feature of your Digga Planetary drive is low maintenance, regular oil changes only are required. It contains no user
serviceable parts, unauthorised disassembly will void warranty. Written permission from Digga must be obtained before
performing any disassembly.
Before First Use
Inspect the drive unit for shipping damage. If damage does exist, do not operate until the damaged parts have been replaced
or repaired.
Before Each Use
• Make sure that all nuts and bolts are in place and properly tightened.
• Make sure that all other fasteners are in place and are performing their specied function.
• Make sure that all hydraulic ttings are tightened and that there are no leaks in any ttings or hoses.
• Make sure that all safety signs are in place, are clean, and are legible (see the safety sign section).
• Check for any oil leaks, wear and tear on pins, linkages, clips, bushes and hood.
• Ensure any damage or excessively worn parts are replaced.
• Always wear safety goggles or glasses when inspecting equipment.
9 Before Use
Escaping uid under pressure as low as 100 PSI can have sucient force to penetrate the
skin up to 4" (100mm) away causing serious personal injury. Fluid escaping from a very small
hole can be almost invisible. Use a piece of cardboard or wood, rather than hands to search
for suspected leaks (A). Keep unprotected body parts, such as face, eyes, and arms as far
away as possible from a suspected leak and use heavy duty PVC protective gloves. Flesh
injected with hydraulic uid may develop gangrene or other permanent disabilities.
WARNING
Cardboard
Hydraulic Hose
or Fitting
Magnifying
Glass
(A)
Protective
PVC Gloves
To Next Page
Loading...
